Keevitaja töötab põhiliselt metalltooteid ja -konstruktsioone valmistavas ettevõttes ning ehitus-, paigaldus-, hoolde- ja remonditöödel.
Keevitaja põhitöö on keevitustööde ettevalmistamine, tarindi koostamine vastavalt joonisele, keevisliidete teostamine ning järeltöötlus ja tulemuse kontroll. Töö... nõuab jooniste lugemise oskust, töötlemistehnoloogia ja materjalide omaduste tundmist.
Käesolevas kutsestandardis on kirjeldatud 3. taseme keevitaja kutsealaseid kompetentse.
Selle taseme keevitaja on võimeline koostama ja keevitama lihtsamaid keevistooteid, detaile ning ehituskonstruktsioone. Keerulisemate tööde (kontrolli nõudvad tooted) puhul vajab juhendamist.
3. taseme keevitaja kasutab oma töös järgmisi keevitusviise: käsikaarkeevitus (MMA 111) ja poolautomaatkeevitus (MAG 135).
Keevitaja, tase 3 kutsestandardis sisaldub ka kaks osakutset:
Käsikaarkeevitaja, tase 3
Poolautomaatkeevitaja, tase 3 MoreHide
A.2 Work units
A.2.1 Töökoha korraldamine, tootmis- ja abivahendite valimine ja ettevalmistamine
2.1.1 Tööjoonise, tööjuhendi ja tehnoloogilise kaardiga (WPS) tutvumine
2.1.2 Töövahendite valimine
2.1.3 Keevitusvahendite valimine
2.1.4 Keevitusseadmete seadistamine ja režiimi valimine
2.1.5 Nõuetekohase tööko...ha korraldamine
2.1.6 Isikukaitsevahendite valimine
A.2.2 Detailide ja koostude ettevalmistamine ja koostamine
2.2.1 Detailide ettevalmistamine ja kontrollimine
2.2.2 Koostude ülesseadmine keevitamiseks ja nende kontrollimine
A.2.3 Kvaliteedi kontrollimine ja defektide parandamine
2.3.1 Keevisõmbluste kontrollimine
2.3.2 Koostu kontrollimine
2.3.3 Defektide parandamine
2.3.4 Lõppkontrolli tegemine
A.2.4 Käsikaarkeevitustööde tegemine ja detailide järeltöötlemine
2.4.1 Käsikaarkeevitustööde tegemine
2.4.2 Vahekontrolli tegemine
2.4.3 Valmis toote järeltöötlemine
A.2.5 Poolautomaatsete keevitustööde tegemine ja detailide järeltöötlemine
2.5.1 Poolautomaatsete keevitustööde tegemine
2.5.2 Vahekontrolli tegemine
2.5.3 Valmis toote järeltöötlemine
Keevitaja 3. taseme kutse sisaldab järgmisi osakutseid:
Käsikaarkeevitaja, tase 3
A.2.1 Töökoha korraldamine, tootmis- ja abivahendite valimine ja ettevalmistamine
2.1.1 Tööjoonise, tööjuhendi ja tehnoloogilise kaardiga (WPS) tutvumine
2.1.2 Töövahendite valimine
2.1.3 Keevitusvahendite valimine
2.1.4 Keevitusseadmete seadistamine ja režiimi valimine
2.1.5 Nõuetekohase töökoha korraldamine
2.1.6 Isikukaitsevahendite valimine
A.2.2 Detailide ja koostude ettevalmistamine ja koostamine
2.2.1 Detailide ettevalmistamine ja kontrollimine
2.2.2 Koostude ülesseadmine keevitamiseks ja nende kontrollimine
A.2.3 Kvaliteedi kontrollimine ja defektide parandamine
2.3.1 Keevisõmbluste kontrollimine
2.3.2 Koostu kontrollimine
2.3.3 Defektide parandamine
2.3.4 Lõppkontrolli tegemine
A.2.4 Käsikaarkeevitustööde tegemine ja detailide järeltöötlemine
2.4.1 Käsikaarkeevitustööde tegemine
2.4.2 Vahekontrolli tegemine
2.4.3 Valmis toote järeltöötlemine
Poolautomaatkeevitaja, tase 3
A.2.1 Töökoha korraldamine, tootmis- ja abivahendite valimine ja ettevalmistamine
2.1.1 Tööjoonise, tööjuhendi ja tehnoloogilise kaardiga (WPS) tutvumine
2.1.2 Töövahendite valimine
2.1.3 Keevitusvahendite valimine
2.1.4 Keevitusseadmete seadistamine ja režiimi valimine
2.1.5 Nõuetekohase töökoha korraldamine
2.1.6 Isikukaitsevahendite valimine
A.2.2 Detailide ja koostude ettevalmistamine ja koostamine
2.2.1 Detailide ettevalmistamine ja kontrollimine
2.2.2 Koostude ülesseadmine keevitamiseks ja nende kontrollimine
A.2.3 Kvaliteedi kontrollimine ja defektide parandamine
2.3.1 Keevisõmbluste kontrollimine
2.3.2 Koostu kontrollimine
2.3.3 Defektide parandamine
2.3.4 Lõppkontrolli tegemine
A.2.5 Poolautomaatsete keevitustööde tegemine ja detailide järeltöötlemine
2.5.1 Poolautomaatsete keevitustööde tegemine
2.5.2 Vahekontrolli tegemine
2.5.3 Valmis toote järeltöötlemine
Keevitaja kutsete tööosade ja tööülesannete võrdlustabel on toodud kutsestandardi lisas 1. MoreHide
A.3 Work environment and specific nature of work
Keevitaja töötab nii sise- kui ka välistingimustes, tööaeg on üldjuhul fikseeritud, kuid sõltuvalt ettevõtte eripärast võib olla korraldatud ka vahetustega töötamine. Töö on mõõduka tempoga, tööülesanded vahelduvad. Keevitaja peab olema valmis töötama ebamugavas või sundasendis, taluma temperatuurik...õikumisi, kõrgusi, vibratsiooni, müra ja tolmu. Töö võib toimuda ohtlikes keskkondades, nt mahutites, ehitus- või tööstusobjektil kõrgustes jne. Ta peab tundma kutsealast ohutustehnikat, elektriseadmete kasutamisega kaasnevat ohutustehnikat, kasutama asjakohaseid kaitsevahendeid ning teadma keevitusega kaasnevaid kahjulikke toimeid inimorganismile (põletusoht, nägemiskahjustused jne).
Keevitamisel eralduvad gaasid ja töökeskkonnas olev kivi- ja metallitolm võivad esile kutsuda allergilisi reaktsioone. MoreHide
A.4 Tools
Keevitaja kasutab oma töös keevitus-, gaaslõike-, metallilõike- ja tõsteseadmeid, elektrilisi, mehaanilisi ja pneumaatilisi käsitööriistu (frees, meisel, haamer, käi jne) ning abivahendeid (rakised, pöördlauad, mehhaniseeritud keevitusseadmed, söeelektroodid jne) ja mõõteriistu (šabloonid, nurgik, m...õõdulint, nihik jne). MoreHide
A.5 Personal qualities required for work: abilities and characteristics
Keevitaja peab oskama oma tööd iseseisvalt planeerida ja olema valmis meeskonnatööks. Töö eeldab arenenud vastutustunnet, hoolikust ja täpsust, kuna töötatakse väärtuslike materjalidega.
Vajalik on ruumiline kujutlusvõime, hea koordinatsioon ja liigutuste täpsus, normaalne füüsiline vorm ja nägemi...ne, kontsentreerumisvõime ja püsivus. MoreHide
A.6 Professional preparation
3. taseme keevitajatel on üldjuhul põhiharidus. Neil on kas erialane kutseharidus või nad on oma tööalase kompetentsuse omandanud erialase täiendkoolituse või praktilise töökogemusega.
Keevitaja, tase 3 kutse saamiseks peab taotleja tõendama kõik kutsestandardis kirjeldatud kompetentsid (B.2.1–B.2.11).
Käsikaarkeevitaja 3. taseme osakutse saamiseks tuleb taotlejal tõendada kompetentsid:
B.2.1 Töökoha korraldamine, tootmis- ja abivahendite valimine ja ettevalmistamine
B.2.2 D...etailide ja koostude ettevalmistamine ja koostamine
B.2.3 Kvaliteedi kontrollimine ja defektide parandamine
B.2.4 Käsikaarkeevitustööde tegemine ja detailide järeltöötlemine
B.2.6–B.2.11 (kõik kutset läbivad kompetentsid)
Poolautomaatkeevitaja 3. taseme osakutse saamiseks tuleb taotlejal tõendada kompetentsid:
B.2.1 Töökoha korraldamine, tootmis- ja abivahendite valimine ja ettevalmistamine
B.2.2 Detailide ja koostude ettevalmistamine ja koostamine
B.2.3 Kvaliteedi kontrollimine ja defektide parandamine
B.2.5 Poolautomaatsete keevitustööde tegemine ja järeltöötlemine
B.2.6 – B.2.11 (kõik kutset läbivad kompetentsid) MoreHide
B.2 Competences
Mandatory competences
Competence
EstQF Level
B.2.1
Organising the workplace and selecting and preparing production equipment and accessories
3
View competence
Performance indicators
1. Familiarises themselves with technical drawings, work instructions and the technological chart (WPS).
2. Chooses the necessary equipment, materials (assemblies, parts, elements, etc.), tools and accessories based on the nature of the work and production conditions under instruction. Chooses a welding method and type of welded joint based on the technical drawing and technological chart under instruction.
3. Chooses the necessary welding equipment (welding wire, welding electrode, protective gas, backing, etc.) based on the WPS under instruction.
4. Configures the welding machine to the mode specified in the WPS and assesses the conformity of the weld on the sample part under instruction.
5. Organises the workplace in their work stage as required and in accordance with fire safety requirements before commencing work. Removes any hindering, excessive or flammable items from the vicinity of the workplace. Covers flammable surfaces in the surrounding area with a suitable cover material.
6. Ensures that they have all of the required personal protective equipment and that it is in working order before commencing work.
Knowledge:
a) materials;
b) properties of metals and their alloys;
c) equipment and accessories used in welding;
d) construction and operating principles of welding current sources;
e) markings of welding and base materials;
f) welding terminology;
g) WPS (Welding Procedure Specification);
h) properties, markings and handling of welding gases;
i) welding modes;
j) weld markings on technical drawings;
k) flame-cutting equipment and its operation;
l) safety requirements (correct work methods, general knowledge about providing first aid, main requirements of working environment, etc.);
m) principles of standard EN-3834 of quality requirements for welding work;
n) standards of welder qualifications.
B.2.2
Preparation and construction of parts and assemblies
3
View competence
Performance indicators
1. Prepares parts for welding – cleans and, if necessary, chamfers the edges to be welded, using the appropriate methods (e.g. manually, mechanically or thermally). Measures the parts to ensure that their measurements comply with the technical drawing.
2. Constructs assemblies (using spot or tack welding) based on the technical drawing and the WPS and checks the compliance of the assembly to the drawing. Fixes the assemblies using fixtures, if necessary.
Knowledge:
a) flame-cutting equipment and its operation;
b) joint types and edge shapes;
c) meanings of symbols on technical drawings;
d) deformation of parts and change of dimensions during welding;
e) methods and equipment for checking measurements;
f) part imperfections;
g) chamfering equipment and its operating principles;
h) safety requirements (correct work methods, general knowledge about providing first aid, main requirements of working environment, etc.);
i) quality levels for imperfections (EVS-EN-ISO 5817).
B.2.3
Quality control and repairing imperfections
3
View competence
Performance indicators
1. Visually checks the welds they have made and ensures that they comply with the requirements of the technical drawing.
2. Checks and measures the assembly and ensures that it complies with the technical drawing and given requirements.
3. Repairs weld imperfections and form deviations in the assembly in the course of the inspection.
4. After repairing the imperfections, conducts a final check of the welds and the assembly and ensures that they comply with standards and quality requirements.
Knowledge:
a) causes of weld imperfections and ways of preventing them;
b) causes of form deviations in the assembly and ways of preventing and eliminating them;
c) quality control methods of welds: destructive testing methods (break, tensile, bend and other tests);
d) quality control methods of welds: non-destructive testing methods (visual, penetrant, magnetic particle, X-ray, ultrasound tests, etc.);
e) control measurement equipment (templates, ruler and calliper) and their principles of use;
f) imperfections characteristic of welding processes, their prevention and their repair;
g) quality levels for imperfections (EVS-EN-ISO 5817).
B.2.4
Manual metal arc welding and post-processing of parts
3
View competence
Performance indicators
1. Fillet-welds steel plates in positions PB and PF and butt-welds in position PA. Does this based on technical drawings and/or the WPS and at quality level C. Cleans the edges of the filling run welds manually or mechanically, if necessary.
2. Ensures with a visual check and using the appropriate measuring equipment that the welds are faultless (without pores, cracks, etc.). Repairs any imperfections.
3. Post-processes the finished product by clearing surfaces of spatter, slag, etc. Cleans the welds.
Knowledge:
a) materials;
b) properties of metals and their alloys;
c) weld markings on technical drawings;
d) preparations for welding parts and structures (constructions);
e) weldability, heat input, preheating and post-heating of metals;
f) markings of welding and base materials;
g) construction and operating principles of welding current sources;
h) properties, markings and handling of welding gases;
i) equipment and accessories used in manual metal arc welding;
j) modes of manual metal arc welding;
k) ways of decreasing deformations;
l) preparing weld edges with mechanical hand tools;
m) flame-cutting equipment and its operation;
n) safety requirements (correct work methods, principles of providing first aid, main requirements of working environment, fire and electrical safety requirements, etc.);
o) quality levels for imperfections (EVS-EN-ISO 5817).
B.2.5
Semi-automatic welding and post-processing of parts
3
View competence
Performance indicators
1. Fillet-welds steel plates in positions PB and PF and butt-welds in position PA. Does this based on technical drawings and/or the WPS and at quality level C. Cleans the edges of the filling run welds manually or mechanically, if necessary.
2. Ensures with a visual check and using the appropriate measuring equipment that the welds are faultless (without pores, cracks, etc.). Repairs any imperfections.
3. Post-processes the finished product by clearing surfaces of spatter, slag, etc. Cleans the welds.
Knowledge:
a) materials;
b) properties of metals and their alloys;
c) weld markings on technical drawings;
d) preparations for welding parts and structures (constructions);
e) weldability, heat input, preheating and post-heating of metals;
f) markings of welding and base materials;
g) construction and operating principles of welding current sources;
h) properties, markings and handling of welding gases;
i) equipment and accessories used in semi-automatic welding (MAG);
j) modes of wire welding;
k) ways of decreasing deformations;
l) preparing weld edges with mechanical hand tools;
m) flame-cutting equipment and its operation;
n) safety requirements (correct work methods, principles of providing first aid, main requirements of working environment, fire and electrical safety requirements, etc.);
o) quality levels for imperfections (EVS-EN-ISO 5817).
Competences related to partial occupational qualification
Käsikaarkeevitaja, tase 3
EstQF Level: 3
Competence
EstQF Level
B.2.1
Organising the workplace and selecting and preparing production equipment and accessories
3
View competence
Performance indicators
1. Familiarises themselves with technical drawings, work instructions and the technological chart (WPS).
2. Chooses the necessary equipment, materials (assemblies, parts, elements, etc.), tools and accessories based on the nature of the work and production conditions under instruction. Chooses a welding method and type of welded joint based on the technical drawing and technological chart under instruction.
3. Chooses the necessary welding equipment (welding wire, welding electrode, protective gas, backing, etc.) based on the WPS under instruction.
4. Configures the welding machine to the mode specified in the WPS and assesses the conformity of the weld on the sample part under instruction.
5. Organises the workplace in their work stage as required and in accordance with fire safety requirements before commencing work. Removes any hindering, excessive or flammable items from the vicinity of the workplace. Covers flammable surfaces in the surrounding area with a suitable cover material.
6. Ensures that they have all of the required personal protective equipment and that it is in working order before commencing work.
Knowledge:
a) materials;
b) properties of metals and their alloys;
c) equipment and accessories used in welding;
d) construction and operating principles of welding current sources;
e) markings of welding and base materials;
f) welding terminology;
g) WPS (Welding Procedure Specification);
h) properties, markings and handling of welding gases;
i) welding modes;
j) weld markings on technical drawings;
k) flame-cutting equipment and its operation;
l) safety requirements (correct work methods, general knowledge about providing first aid, main requirements of working environment, etc.);
m) principles of standard EN-3834 of quality requirements for welding work;
n) standards of welder qualifications.
B.2.2
Preparation and construction of parts and assemblies
3
View competence
Performance indicators
1. Prepares parts for welding – cleans and, if necessary, chamfers the edges to be welded, using the appropriate methods (e.g. manually, mechanically or thermally). Measures the parts to ensure that their measurements comply with the technical drawing.
2. Constructs assemblies (using spot or tack welding) based on the technical drawing and the WPS and checks the compliance of the assembly to the drawing. Fixes the assemblies using fixtures, if necessary.
Knowledge:
a) flame-cutting equipment and its operation;
b) joint types and edge shapes;
c) meanings of symbols on technical drawings;
d) deformation of parts and change of dimensions during welding;
e) methods and equipment for checking measurements;
f) part imperfections;
g) chamfering equipment and its operating principles;
h) safety requirements (correct work methods, general knowledge about providing first aid, main requirements of working environment, etc.);
i) quality levels for imperfections (EVS-EN-ISO 5817).
B.2.3
Quality control and repairing imperfections
3
View competence
Performance indicators
1. Visually checks the welds they have made and ensures that they comply with the requirements of the technical drawing.
2. Checks and measures the assembly and ensures that it complies with the technical drawing and given requirements.
3. Repairs weld imperfections and form deviations in the assembly in the course of the inspection.
4. After repairing the imperfections, conducts a final check of the welds and the assembly and ensures that they comply with standards and quality requirements.
Knowledge:
a) causes of weld imperfections and ways of preventing them;
b) causes of form deviations in the assembly and ways of preventing and eliminating them;
c) quality control methods of welds: destructive testing methods (break, tensile, bend and other tests);
d) quality control methods of welds: non-destructive testing methods (visual, penetrant, magnetic particle, X-ray, ultrasound tests, etc.);
e) control measurement equipment (templates, ruler and calliper) and their principles of use;
f) imperfections characteristic of welding processes, their prevention and their repair;
g) quality levels for imperfections (EVS-EN-ISO 5817).
B.2.4
Manual metal arc welding and post-processing of parts
3
View competence
Performance indicators
1. Fillet-welds steel plates in positions PB and PF and butt-welds in position PA. Does this based on technical drawings and/or the WPS and at quality level C. Cleans the edges of the filling run welds manually or mechanically, if necessary.
2. Ensures with a visual check and using the appropriate measuring equipment that the welds are faultless (without pores, cracks, etc.). Repairs any imperfections.
3. Post-processes the finished product by clearing surfaces of spatter, slag, etc. Cleans the welds.
Knowledge:
a) materials;
b) properties of metals and their alloys;
c) weld markings on technical drawings;
d) preparations for welding parts and structures (constructions);
e) weldability, heat input, preheating and post-heating of metals;
f) markings of welding and base materials;
g) construction and operating principles of welding current sources;
h) properties, markings and handling of welding gases;
i) equipment and accessories used in manual metal arc welding;
j) modes of manual metal arc welding;
k) ways of decreasing deformations;
l) preparing weld edges with mechanical hand tools;
m) flame-cutting equipment and its operation;
n) safety requirements (correct work methods, principles of providing first aid, main requirements of working environment, fire and electrical safety requirements, etc.);
o) quality levels for imperfections (EVS-EN-ISO 5817).
Poolautomaatkeevitaja, tase 3
EstQF Level: 3
Competence
EstQF Level
B.2.1
Organising the workplace and selecting and preparing production equipment and accessories
3
View competence
Performance indicators
1. Familiarises themselves with technical drawings, work instructions and the technological chart (WPS).
2. Chooses the necessary equipment, materials (assemblies, parts, elements, etc.), tools and accessories based on the nature of the work and production conditions under instruction. Chooses a welding method and type of welded joint based on the technical drawing and technological chart under instruction.
3. Chooses the necessary welding equipment (welding wire, welding electrode, protective gas, backing, etc.) based on the WPS under instruction.
4. Configures the welding machine to the mode specified in the WPS and assesses the conformity of the weld on the sample part under instruction.
5. Organises the workplace in their work stage as required and in accordance with fire safety requirements before commencing work. Removes any hindering, excessive or flammable items from the vicinity of the workplace. Covers flammable surfaces in the surrounding area with a suitable cover material.
6. Ensures that they have all of the required personal protective equipment and that it is in working order before commencing work.
Knowledge:
a) materials;
b) properties of metals and their alloys;
c) equipment and accessories used in welding;
d) construction and operating principles of welding current sources;
e) markings of welding and base materials;
f) welding terminology;
g) WPS (Welding Procedure Specification);
h) properties, markings and handling of welding gases;
i) welding modes;
j) weld markings on technical drawings;
k) flame-cutting equipment and its operation;
l) safety requirements (correct work methods, general knowledge about providing first aid, main requirements of working environment, etc.);
m) principles of standard EN-3834 of quality requirements for welding work;
n) standards of welder qualifications.
B.2.2
Preparation and construction of parts and assemblies
3
View competence
Performance indicators
1. Prepares parts for welding – cleans and, if necessary, chamfers the edges to be welded, using the appropriate methods (e.g. manually, mechanically or thermally). Measures the parts to ensure that their measurements comply with the technical drawing.
2. Constructs assemblies (using spot or tack welding) based on the technical drawing and the WPS and checks the compliance of the assembly to the drawing. Fixes the assemblies using fixtures, if necessary.
Knowledge:
a) flame-cutting equipment and its operation;
b) joint types and edge shapes;
c) meanings of symbols on technical drawings;
d) deformation of parts and change of dimensions during welding;
e) methods and equipment for checking measurements;
f) part imperfections;
g) chamfering equipment and its operating principles;
h) safety requirements (correct work methods, general knowledge about providing first aid, main requirements of working environment, etc.);
i) quality levels for imperfections (EVS-EN-ISO 5817).
B.2.3
Quality control and repairing imperfections
3
View competence
Performance indicators
1. Visually checks the welds they have made and ensures that they comply with the requirements of the technical drawing.
2. Checks and measures the assembly and ensures that it complies with the technical drawing and given requirements.
3. Repairs weld imperfections and form deviations in the assembly in the course of the inspection.
4. After repairing the imperfections, conducts a final check of the welds and the assembly and ensures that they comply with standards and quality requirements.
Knowledge:
a) causes of weld imperfections and ways of preventing them;
b) causes of form deviations in the assembly and ways of preventing and eliminating them;
c) quality control methods of welds: destructive testing methods (break, tensile, bend and other tests);
d) quality control methods of welds: non-destructive testing methods (visual, penetrant, magnetic particle, X-ray, ultrasound tests, etc.);
e) control measurement equipment (templates, ruler and calliper) and their principles of use;
f) imperfections characteristic of welding processes, their prevention and their repair;
g) quality levels for imperfections (EVS-EN-ISO 5817).
B.2.5
Semi-automatic welding and post-processing of parts
3
View competence
Performance indicators
1. Fillet-welds steel plates in positions PB and PF and butt-welds in position PA. Does this based on technical drawings and/or the WPS and at quality level C. Cleans the edges of the filling run welds manually or mechanically, if necessary.
2. Ensures with a visual check and using the appropriate measuring equipment that the welds are faultless (without pores, cracks, etc.). Repairs any imperfections.
3. Post-processes the finished product by clearing surfaces of spatter, slag, etc. Cleans the welds.
Knowledge:
a) materials;
b) properties of metals and their alloys;
c) weld markings on technical drawings;
d) preparations for welding parts and structures (constructions);
e) weldability, heat input, preheating and post-heating of metals;
f) markings of welding and base materials;
g) construction and operating principles of welding current sources;
h) properties, markings and handling of welding gases;
i) equipment and accessories used in semi-automatic welding (MAG);
j) modes of wire welding;
k) ways of decreasing deformations;
l) preparing weld edges with mechanical hand tools;
m) flame-cutting equipment and its operation;
n) safety requirements (correct work methods, principles of providing first aid, main requirements of working environment, fire and electrical safety requirements, etc.);
o) quality levels for imperfections (EVS-EN-ISO 5817).
Recurring competences
Competence
EstQF Level
B.2.6
Following work instructions and technology and quality requirements
3
View competence
Performance indicators
1. Uses all acquired field-specific knowledge and skills to achieve their professional goals.
2. Observes quality requirements when making products.
3. Understands and is able to assess the possible consequences of low-quality work. Pays heed to deadlines and technological manuals.
B.2.7
Töötervishoiu- ja tööohutusnõuete järgimine
3
View competence
Tegevusnäitajad:
1. Vältimaks tööõnnetusi järgib töö planeerimisel, töökoha ettevalmistamisel, töötades ja töökoha korrastamisel rangelt töötervishoiu- ja tööohutusnõudeid.
2. Õnnetusjuhtumi korral annab vältimatut abi, kutsub professionaalse abi ja teatab õnnetusjuhtumist vahetule juhile või tööandjale.
B.2.8
Participation in team work
4
View competence
Performance indicators
1. Participates in teamwork. Is cooperative, shares with others all information that is necessary and useful for work and works towards achieving the best common result.
2. Has the skill and courage to present and defend their opinions in a well-argued way and to present ideas and suggestions for improving work.
3. Takes employees doing other work into account when working.
B.2.9
Adjusting to changing conditions
3
View competence
Performance indicators
1. Can adjust to changing work conditions.
2. Analyses their activities and can find appropriate information to perform their duties and solve work-related problems.
B.2.10
Participation in additional training
3
View competence
Performance indicators
1. Acquires new duties, methods and techniques quickly.
2. Uses opportunities for self-improvement and to upgrade their skills and takes part in in-service training.
B.2.11
Töövahendite kasutamine ja hoiustamine
3
View competence
Tegevusnäitajad:
1. Kasutab kõiki töövahendeid ja seadmeid heaperemehelikult, korrastab ja puhastab töös kasutatavaid töövahendeid, seadmeid ja kaitsevahendeid regulaarselt, järgides nende kasutus- ja hooldusjuhendeid.
Hindamismeetod(id):
Läbivaid kompetentse hinnatakse integreeritult kõigi teiste kutsestandardis toodud kompetentside hindamisega.
C General information and Annexes
Designation of occupational qualification standard in register:
10-16092014-1.4/7k
Field of occupational activity:
Engineering, Manufacturing and Processing
Occupational Qualification Council:
Engineering, Metal and Machine Industry
No. of decision of Occupational Qualification Council:
9
Date of decision of Occupational Qualification Council:
16.09.2014
EstQF level:
3
Reference to European Qualifications Framework (EQF):
International Standard Classification of Occupations:
7 Craft and Related Trades Workers72 Metal, Machinery and Related Trades Workers721 Sheet and Structural Metal Workers, Moulders and Welders, and Related Workers7212 Welders and Flame Cutters
ISCED Fields of Education and Training (ISCED-F 2013):
07 Engineering, manufacturing and construction071 Engineering and engineering trades0715 Mechanics and metal trades
Statistical Classification of Economic Activities in the European Community (NACE):
C MANUFACTURING25 Manufacture of fabricated metal products, except machinery and equipment
